Buck,
Not knowing what the actual bucket weighs, I will venture a guess that you have at least 15 pounds of screws in the bucket.
Phill
Search found 412 matches
- Sat Apr 29, 2017 4:37 am
- Forum: Restoration
- Topic: 1958 Cruisers Seafarer
- Replies: 22
- Views: 47693
- Sat Apr 16, 2016 11:58 am
- Forum: Restoration
- Topic: Stem Repair
- Replies: 4
- Views: 13383
Re: Stem Repair
Portside,
I recommend waiting until adhesive has cured then tighten the screws. Also it might take longer then a week for the boat life to cure before it can be sanded and painted. Give it time for a good cure.
Good Luck,
Phill
I recommend waiting until adhesive has cured then tighten the screws. Also it might take longer then a week for the boat life to cure before it can be sanded and painted. Give it time for a good cure.
Good Luck,
Phill
- Fri Apr 15, 2016 11:35 am
- Forum: Restoration
- Topic: Stem Repair
- Replies: 4
- Views: 13383
Re: Stem Repair
Portside,
Sounds like a good workable plan to me.
Good Luck,
Phill
Sounds like a good workable plan to me.
Good Luck,
Phill
- Sun Sep 06, 2015 7:11 am
- Forum: Restoration
- Topic: Cleaning question
- Replies: 13
- Views: 27257
Re: Cleaning question
The Thompson Catalogs you mentioned are available thru this website: http://www.wcha.org.
They have the Thompson catalog DVD & Thumb drives as well as other boat and canoe manufactures catalog DVDs available.
A very good source of info
Good Luck,
Phill
They have the Thompson catalog DVD & Thumb drives as well as other boat and canoe manufactures catalog DVDs available.
A very good source of info
Good Luck,
Phill
- Fri Aug 07, 2015 6:37 am
- Forum: Restoration
- Topic: 60's Thomboy repair/restoration
- Replies: 14
- Views: 28410
Re: 60's Thomboy repair/restoration
You could try some vinyl cleaners and if that does not work the only alternative is replacing it.
Good Luck,
Phill
Good Luck,
Phill
- Sat Jul 25, 2015 1:18 pm
- Forum: Restoration
- Topic: 60's Thomboy repair/restoration
- Replies: 14
- Views: 28410
Re: 60's Thomboy repair/restoration
lenthan, Wood type recommended would be Mahogany, as thegammas mentioned, it is rote resistant, light in weight and easy to work with. As to locating the gas tank in the bow, that was very common and one can always trim the motor to offset the weight. I have seen custom "V" shaped tanks in...
- Thu Jul 16, 2015 7:20 am
- Forum: Trailers
- Topic: Trailer fender
- Replies: 3
- Views: 19367
Re: Trailer fender
Shaun,
If you can not find the fender you want on E-bay, look at what Fleet-Farm has to offer.
Also look online for firms that handle trailer parts.
Good Luck,
Phill
If you can not find the fender you want on E-bay, look at what Fleet-Farm has to offer.
Also look online for firms that handle trailer parts.
Good Luck,
Phill
- Wed Jun 24, 2015 5:37 pm
- Forum: Trailers
- Topic: Changing Trailer tire size
- Replies: 3
- Views: 14826
Re: Changing Trailer tire size
John, If you change tire size you will need to also change the fenders as the originals will not have enough clearance for the larger diameter tires. Also check the clearance between the boat hull and the existing fenders to be sure you can get a larger tire and fender installed which will not hit t...
- Fri Jun 19, 2015 6:38 am
- Forum: Engines
- Topic: '57 johnson
- Replies: 5
- Views: 25147
Re: '57 johnson
Andre, Owners manuals and shop manuals are available from Ken Cook Co. out of Milwaukee, WI for both Evinrude and Johnson older motors. Check out at: http://www.kencook.com I have Evinrude's and have purchased manuals for all my motors thru them. I also received a listing of people and companies all...
- Wed May 13, 2015 5:42 am
- Forum: Restoration
- Topic: Cleaning question
- Replies: 13
- Views: 27257
Re: Cleaning question
LancerJohn14, I know of no product that will dissolve resorcinol glue. The only way is to break the joint, which generally ends up splitting the wood not the glue joint, or cutting the joint line with a saw of some type. I would not think the keel would have been glued down from the factory, it woul...
- Thu May 07, 2015 6:15 am
- Forum: Restoration
- Topic: 60's Thomboy repair/restoration
- Replies: 14
- Views: 28410
Re: 60's Thomboy repair/restoration
Lenthan, If the wood is sound and not rotted. You can clean out the gap to be sure any old glue or debris is out of the gap and fill it with "Boat-Life" caulking. Be sure to force the caulking deep into the gap. Allow to cure for a day and refill to bring it above the surface if has shrunk...
- Sat Apr 04, 2015 5:02 am
- Forum: Restoration
- Topic: Outer keel and stem replacement
- Replies: 14
- Views: 29074
Re: Outer keel and stem replacement
Jason, Quarter saw white oak can be found by looking thru lumber of the correct thickness you are looking for by going thru a stack of lumber to find boards with growth rings that are perpendicular to the width of the board. Also a board that has growth rings parallel to the width can be cut into st...
- Mon Mar 30, 2015 4:34 pm
- Forum: Restoration
- Topic: refinishing my thompson
- Replies: 2
- Views: 10689
Re: refinishing my thompson
Tyler,
Unless you plan on having the boat in the water all season, I see no reason to use anti-fowling paint on the hull. A good coat of marine gloss paint will be fine.
If the boat sets in water everyday then spend the money on anti-fowling paint other wise it is not worth it.
Good Luck,
Phill
Unless you plan on having the boat in the water all season, I see no reason to use anti-fowling paint on the hull. A good coat of marine gloss paint will be fine.
If the boat sets in water everyday then spend the money on anti-fowling paint other wise it is not worth it.
Good Luck,
Phill
- Mon Mar 16, 2015 10:43 am
- Forum: What do I have here?
- Topic: Thompson Bros. Cortland plant
- Replies: 5
- Views: 17790
Re: Thompson Bros. Cortland plant
tmcconnell, I do not know of any way of positively finding the year of a boat built in Cortland, NY. I can tell you that it appears you have a model know as the TVT Hydroplane Runabout. These show up in the catalog's from 1935 thru 1955. Sorry, I can not be of more help on the year of manufacture. T...
- Sat Feb 28, 2015 6:04 am
- Forum: Restoration
- Topic: Outer keel and stem replacement
- Replies: 14
- Views: 29074
Re: Outer keel and stem replacement
Here is a photo of a hull being built which should give you some idea of what was originally done. http://i1220.photobucket.com/albums/dd449/phillblank/ThompsonJig02_zps1duywibo.jpg I hope this is of help. The screws and bolts on the keel should be countersunk and plugged. The flat head screws and s...