How Much Stain

Find paint matches and what others have used here.

Moderators: a j r, TDockside, Miles, Moderators

Post Reply
JALL
Posts: 113
Joined: Tue Aug 24, 2010 4:39 am
Location: WISCONSIN

How Much Stain

Post by JALL »

How much stain would I need to stain the deck and transom of a 16ft. boat. I would probable stain the windshield frame work also. I was thinking about ordering 2qts. stain and a gallon of varnish to start. Thank You
LancerBoy
Posts: 1417
Joined: Mon Jan 28, 2008 3:47 am
Location: Minneapolis

Post by LancerBoy »

If using filler stain a tiny can (maybe a pint) will be plenty. Regular thinned stain such as you get at the big box store, probably a quart is plenty.

Varnish quantity will depend upon how many coats you want to apply.

Andreas
John Hart
Posts: 208
Joined: Sun Jan 29, 2006 7:26 pm

Post by John Hart »

I bought a pint of Interlux Red Mahogany 1579... and used about 3/4 on my 1960 Seacoaster. 15'10"

I did the deck, sheer strake, inside around the gunwale, dash, outside transom, window frame, and spray rails.

I still have some left over.

I keep a box of plastic spoons, and a box of elbow straws around to get small amounts of stain and varnish out of the can.

If you can get a good price, you might consider getting four quarts instead of a gal... I have gotten both. By the time you do the inside, seats, and stained areas, you will likely go through 2+ gallons.

Image

Image

Image
John.
Post Reply