Depth finder

If none of the above categories fit your question or comment, post it here!

Moderators: TDockside, Miles, a j r, Moderators

Depth finder

Postby Portside » Wed Sep 04, 2013 5:47 pm

Looking at a Hawkeye glue-down mounted transducer depth finder D10D. Anyone have one of these installed? Mfg says works on solid fiberglass or aluminum. Work on a wood hull?
Portside
 
Posts: 38
Joined: Fri Dec 04, 2009 8:38 pm
Location: Wisconsin

Re: Depth finder

Postby Phill Blank » Thu Sep 05, 2013 5:26 am

Portside,

I do not think it will work on a wood hull because of the porosity of the wood. Fiberglass and aluminum are solid without any voids.
I installed one of these on a fiberglass sailboat I owned. The instructions advised that if you had a hull with a balsa wood core you needed to cut thru the inner layer of fiberglass and cut out the balsa wood core then sand and glue the transducer housing to the inside of the outer hull.

Good Luck,

Phill
Image
Phill Blank
 
Posts: 412
Joined: Thu Jan 05, 2006 4:20 pm
Location: Hurley, Wisconsin

Re: Depth finder

Postby Portside » Sun Sep 08, 2013 5:47 am

Thanks Phill-
The manufacturer says it will not work thru wood. Just wondered if anyone had tried to skirt the material issue with an ingenious solution. I am not real interested in cutting a 2"hole in the bottom for a transducer.
Portside
 
Posts: 38
Joined: Fri Dec 04, 2009 8:38 pm
Location: Wisconsin

Re: Depth finder

Postby W Guy » Sun Sep 08, 2013 6:33 am

Why not hang it off the back of the transom? My father did it on his fiberglass boat and it worked fine.

Verne :)
W Guy
 
Posts: 199
Joined: Mon Oct 13, 2008 10:30 am

Re: Depth finder

Postby Bill Dunn » Mon Sep 09, 2013 2:36 pm

My sons bought me one of the less expensive fish finders at Gander Mtn a few years ago. The transducer hangs on the transom and it works great as a depth finder.
Bill
All Dunn ll
'59 Sea Lancer
Bill Dunn
 
Posts: 93
Joined: Wed Jan 28, 2009 7:34 pm
Location: Wisconsin


Return to Miscellaneous

Who is online

Users browsing this forum: No registered users and 2 guests

cron