2_Cycle Oil

Suggestions, concerns, and what is the correct power plant for your Thompson.

Moderators: TDockside, Miles, a j r, Moderators

2_Cycle Oil

Postby John Hart » Fri Jun 17, 2011 11:58 am

I have a 1961 Johnson 75Hp.. V4AL.... I have been getting Johnson/Evinrude 2-Cycle oil... the Multi-Purpose blend... The store I have been getting that from, has replaced it with a "Mineral Blend" oil... (Still Johnson/Evinrude)

Does anyone know what that blend is and if it matters which one I use... (I use a 24:1 ratio)

I would rather stick to a Johnson/Evinrude label, instead of just using a 30 WT auto oil.

Thanks
John Hart
 
Posts: 208
Joined: Sun Jan 29, 2006 7:26 pm

Postby txcaptdan » Sun Jun 19, 2011 8:49 am

I have been using synthetic 2 stoke for several years now and have had good results and a lack of fouled plugs since.
Image
Dan Stober
1965 20' Cruisers Inc. 570 Seacamper
1962 20' Cruisers Inc. 502
1963 16' Cruisers Inc. 202 Seafarer
Weatherford, Texas
txcaptdan
 
Posts: 348
Joined: Mon Jan 02, 2006 2:48 pm
Location: Weatherford, Texas

Postby Bill Dunn » Sun Jun 19, 2011 7:51 pm

Running it that rich I think the only thing you need to worry about is using a good brand oil. The oils now days are much better than when these motors were built. I have a "63 Merc 85 hp and have been told by several mechanics at dealerships to run mine at 50/1 using good oil instead of the 24/1 it says in the book. Mine has been run at 50/1 for about 40 years and still runs great.
Bill
All Dunn ll
'59 Sea Lancer
Bill Dunn
 
Posts: 95
Joined: Wed Jan 28, 2009 7:34 pm
Location: Wisconsin

Postby John Hart » Mon Jun 20, 2011 8:41 am

Thanks Fellas.... Dan, what is the name/label of the synthetic you use...?
John Hart
 
Posts: 208
Joined: Sun Jan 29, 2006 7:26 pm


Return to Engines

Who is online

Users browsing this forum: No registered users and 4 guests

cron