Wood putty options

Questions/concerns/issues. How did the other guy do it? Find out here.

Moderators: a j r, TDockside, Miles, Moderators

Post Reply
tcvc
Posts: 46
Joined: Mon Apr 20, 2009 3:34 pm

Wood putty options

Post by tcvc »

I hit an unprotected corner of a village dock and put a big gouge in the hull of my boat. This is way above the water line. I am wondering what would be the best method of repair. I could sand it down seeing as how it is painted but I really never had to good of luck doing that, I would rather fill the gouge in and then paint it. Any one had any luck with a marine filler or putty ?
Thanks
Last edited by tcvc on Sat Oct 20, 2018 4:23 pm, edited 1 time in total.
Torchie
Posts: 270
Joined: Tue Nov 23, 2010 4:55 pm
Location: Alden, Michigan

Post by Torchie »

3M, West marine and Bondo(yes Bondo) all make a marine grade filler.
Used mostly for filling screw holes and for fairing bottom and side planks under paint.
These fillers all work fine as long as they are not applied to thick. Thats why fillers used in automotive repairs get such bad raps. They are designed to be used as a final coat to remove imperfections in the surface. Not to fill craters!.
Check the label instructions in regards to thicknees that should be used.
Karl.
Lismarie6363
Posts: 2
Joined: Sun Jun 19, 2011 4:48 pm
Location: NW Ohio

Post by Lismarie6363 »

Travaco Marine-tex has all rave reviews, have used it before best stuff.

http://www.westmarine.com/webapp/wcs/st ... howReviews

Good Luck
Post Reply