Junction box location

Questions/concerns/issues. How did the other guy do it? Find out here.

Moderators: TDockside, Miles, a j r, Moderators

Junction box location

Postby JALL » Fri Aug 17, 2012 4:01 pm

I don't know what it is called but how close to the notch on top of the transom, that the motors sit in, can I mount the junction boxes. Seems that the only room is high up on the transom. Thanks for any help.
JALL
 
Posts: 113
Joined: Tue Aug 24, 2010 4:39 am
Location: WISCONSIN

Postby Torchie » Sat Aug 18, 2012 10:53 am

My boat has has a motor well and the boxes are mounted high up and to the sides.
I am also running twin engines in mine. One has a voltage regulator in it and the other doesn't.
If you are concerned about the way it looks you can mount them somewhere less visable but you will have to modify your wiring to reach it.
Generaly it seems that most of the ones that I has seen were placed close to the engine and easily acessable..
Karl.
Torchie
 
Posts: 270
Joined: Tue Nov 23, 2010 4:55 pm
Location: Alden, Michigan

Postby Torchie » Sat Aug 18, 2012 10:55 am

Also if you are concerned about water just make sure your box has a good gasket and all should be well.
Karl.
Torchie
 
Posts: 270
Joined: Tue Nov 23, 2010 4:55 pm
Location: Alden, Michigan

Junction Box

Postby JALL » Sat Aug 18, 2012 5:09 pm

Yes, was concerned about water. Thanks
JALL
 
Posts: 113
Joined: Tue Aug 24, 2010 4:39 am
Location: WISCONSIN


Return to Restoration

Who is online

Users browsing this forum: No registered users and 6 guests

cron