Turning the screws

Questions/concerns/issues. How did the other guy do it? Find out here.

Moderators: TDockside, Miles, a j r, Moderators

Turning the screws

Postby rong » Tue Jul 02, 2013 7:08 pm

I am installing the bottom on my 63 seacoaster and need to know how tight to make the machine screws.
How do I know if the machine screws are tight enough.
I'm concerned about striping or snapping the new silicon bronze screws.
Is it snug plus a half turn or something similar?
rong
 
Posts: 33
Joined: Thu May 04, 2006 7:04 pm
Location: Buffalo, NY

Re: Turning the screws

Postby Torchie » Wed Jul 03, 2013 2:02 pm

Just make them as tight as you feel comortable with. If you are using the correct length screw you won't hve a lot of thread showing past the nut.
Use a nut driver. It looks like a screwdriver handel with socket end on it. Don't use a regular socket and rachet or wrench as It will be to easy to really put some torque on it.
It's mostly a judgement thing.
Hope this helps.
Torchie.
Torchie
 
Posts: 270
Joined: Tue Nov 23, 2010 4:55 pm
Location: Alden, Michigan


Return to Restoration

Who is online

Users browsing this forum: No registered users and 6 guests

cron