Disassemble steering wheel?

Questions/concerns/issues. How did the other guy do it? Find out here.

Moderators: TDockside, Miles, a j r, Moderators

Disassemble steering wheel?

Postby desseks » Sat Jun 11, 2016 10:32 am

I have a 1967 Peshtigo Sea Coaster that is almost finished after nine years(!).

I'm trying to disassemble the steering wheel assembly, and cannot get the cap in the center of the wheel off. It does not unscrew and there is no retaining ring in sight. Does it just pop off? (Have tried to pry it off but so far no luck). Any advice appreciated, as I don't want to destroy it as I figure out how it's supposed to work.

Thanks very much.
desseks
 
Posts: 6
Joined: Fri Jun 10, 2011 8:48 am

Re: Disassemble steering wheel?

Postby thegammas » Sun Jun 12, 2016 6:53 am

on my Cortland boat the center cap pops right off, underneath is a bolt on a threaded shaft. Took that off, and discovered that that wheel will NOT come off unless I want to destroy it. Tried a few different wheel pullers, etc. No Go,
Peter Stransky
1962 Cortland Custom Sea Lancer
Wilmington, Delaware
thegammas
 
Posts: 559
Joined: Sat Nov 25, 2006 2:10 pm
Location: Wilmington, Delaware. peterstransky@verizon.net - put wooden boat in the subject

Re: Disassemble steering wheel?

Postby steve in texas » Tue Jun 14, 2016 2:50 am

Peter, i had to break mine down from the backside. Used air rivet gun to break loose. Never did get wheel off...painted still on shaft.
steve in texas
 
Posts: 67
Joined: Wed Aug 05, 2015 10:48 am

Re: Disassemble steering wheel?

Postby desseks » Sun Jun 19, 2016 6:47 pm

For future reference, the cap on this model twists off (there is a small machine screw on the underside of the center of the cap, which threads into the center of the shaft of the steering column).
desseks
 
Posts: 6
Joined: Fri Jun 10, 2011 8:48 am


Return to Restoration

Who is online

Users browsing this forum: No registered users and 5 guests

cron