Page 1 of 1

63 Sea Lancer Dash Help

PostPosted: Mon Jan 30, 2017 7:19 am
by ewrice
Hello fellow Thompson collectors, restorers and dreamers,
I have a project I have been working on for a few years now that is finally reaching the point of reassembly. It is a boat that has been in the family for years and I hope to keep it that way for years to come. I will give out more info on this unique project later on, and if all works out, I will bring her over on the Badger to the 2017 rally.

My question today is about the original dash on the '63 Peshtigo built Sea Lancers. I need to know the height and thickness (aprox) of the vinyl covered dash board used. I also need to know the dimensions to where the steering column was mounted. Last, I need to know how wide the white vinyl stripe was down the center, and if any piping was used between the white and blue.

Thanks
Eric

Re: 63 Sea Lancer Dash Help

PostPosted: Mon Jan 30, 2017 8:27 am
by LancerBoy
Well let's hope that someone who has one of these pipes up and answers your questions.

Andreas

Re: 63 Sea Lancer Dash Help

PostPosted: Mon Mar 27, 2017 8:29 am
by LancerBoy
Anyone out there with a 1963 Sea Lancer (or other '63 model?) that can provide some dimensions???

Andreas

Re: 63 Sea Lancer Dash Help

PostPosted: Wed Jun 07, 2017 7:21 pm
by ewrice
I have all the dimensions on this now. Was able to measure a boat locally, and do some creative measuring and calculating on old family photos.