screws??

Questions/concerns/issues. How did the other guy do it? Find out here.

Moderators: a j r, TDockside, Miles, Moderators

Post Reply
GulfCoastThompson
Posts: 25
Joined: Fri Sep 04, 2009 8:49 pm

screws??

Post by GulfCoastThompson »

Is there a reason not to use stainless screws in areas where they are going to be covered. I understand using brass / silicon bronze in areas where they will be visible. Just curious as stainless are much more accesible along the gulf coast.
Ken
Fairhope, AL
Phill Blank
Posts: 412
Joined: Thu Jan 05, 2006 4:20 pm
Location: Hurley, Wisconsin

Post by Phill Blank »

GulfCoastThompson,

Only problem I know of is stainless fasteners if sealed from air will rust. Other then that I see no problem.
Have you tried Jamestown supply for fasteners?

Good Luck,

Phill
Image
LancerBoy
Posts: 1417
Joined: Mon Jan 28, 2008 3:47 am
Location: Minneapolis

Post by LancerBoy »

ditto.

From what I undersatnd, in order for stanless steel to remain stainless, it must be exposed to the atmosphere. If it's all covered up under putty or a wood bung, it is no longer exposed and it will corrode.

Andreas
Torchie
Posts: 270
Joined: Tue Nov 23, 2010 4:55 pm
Location: Alden, Michigan

Post by Torchie »

Classic Boat Connection is a great resources for fasteners as well. Friendly to deal with and always quick shipping.
Karl.
Post Reply