Questions/concerns/issues. How did the other guy do it? Find out here.
Moderators: a j r , TDockside , Miles , Moderators
txcaptdan
Posts: 348 Joined: Mon Jan 02, 2006 2:48 pm
Location: Weatherford, Texas
Contact:
Post
by txcaptdan » Wed Aug 11, 2010 11:43 am
I swapped out my old 90hp Johnson Metoer for a 1985 115hp Johnson with tilt and trim. Bolted right up and will launch tomorrow. I am really looking forward to the tilt and trim option . Wish me luck!
Uploaded with
ImageShack.us
Uploaded with
ImageShack.us
Also looking forward to the reduced noise!
Dan Stober
1965 20' Cruisers Inc. 570 Seacamper
1962 20' Cruisers Inc. 502
1963 16' Cruisers Inc. 202 Seafarer
Weatherford, Texas
240sxguy
Posts: 113 Joined: Thu Sep 03, 2009 7:56 am
Location: Madison, Wi
Post
by 240sxguy » Wed Aug 11, 2010 12:01 pm
Depending on how reliable my merc ends up being, a newer powerplant looks pretty darn attractive. Nice boat captain!
txcaptdan
Posts: 348 Joined: Mon Jan 02, 2006 2:48 pm
Location: Weatherford, Texas
Contact:
Post
by txcaptdan » Fri Aug 13, 2010 6:05 pm
Lake tested her today OMG what a difference, 1/3 the noise and 4x the power. Hit 32 on rough water, could ski behind this boat now. I never realized how tired the old 90 hp was.
Dan Stober
1965 20' Cruisers Inc. 570 Seacamper
1962 20' Cruisers Inc. 502
1963 16' Cruisers Inc. 202 Seafarer
Weatherford, Texas
240sxguy
Posts: 113 Joined: Thu Sep 03, 2009 7:56 am
Location: Madison, Wi
Post
by 240sxguy » Sat Aug 14, 2010 8:21 am
*sigh* but I like my merc! LOL
Different prop maybe?
jimmylapstrake
Posts: 22 Joined: Sun Jun 14, 2009 9:37 am
Location: Haverhill, MA
Post
by jimmylapstrake » Mon Aug 16, 2010 9:14 am
what are you running for a Merc?
Jim Melanson
240sxguy
Posts: 113 Joined: Thu Sep 03, 2009 7:56 am
Location: Madison, Wi
Post
by 240sxguy » Mon Aug 16, 2010 10:12 am
Jim, my merc 900 is what I am referring to.
jimmylapstrake
Posts: 22 Joined: Sun Jun 14, 2009 9:37 am
Location: Haverhill, MA
Post
by jimmylapstrake » Mon Aug 16, 2010 10:37 am
1965?? basically a merc 1000. A 115 pwr head up to 1972 would fit on your intermediate housing if you wanted to go that route for more power
Jim Melanson
240sxguy
Posts: 113 Joined: Thu Sep 03, 2009 7:56 am
Location: Madison, Wi
Post
by 240sxguy » Mon Aug 16, 2010 10:39 am
Thanks for the tip Jim!